Deepflow/ Hi-Cap Gutter Angle - 90 Degree x 115mm x 75mm Grey
|Dimension||185mm (W) x 190mm (L) x 95mm (D)|
|Guarantee||5 Years Manufacturers|
|Specification||BS EN 12200 / BS EN 607 / BS EN 1462|
|Size||115mm x 75mm|
90 degrees deepflow gutter angles are used at the corners of the installation. As deep flow gutter is a symmetrical system, these fittings can be used on either external or internal corners. For a quick overview of gutter angles please watch the short video below (1min 12 secs).
The guttering should always be supported by a fascia bracket within 150mm (6") of any corner. This is to prevent water from collecting in the fitting, which in turn would cause the gutter angle to drop down, putting stress on the joints and reducing the flow rate. You can view a video on how to correctly install FloPlast Gutter systems in our Guides and Tips Section.