Cast Iron Beaded Half Round Gutter Stopend Outlet Spigoted - 150mm for 100mm Downpipe Primed
Click or tap the image to open in fullscreen
| Code | HB6022C |
|---|---|
| EAN Code | 0798237184364 |
| Weight (kg) | 3.000000 |
| Brand | Hargreaves Premier |
| Colour | Grey Primer |
| Dimension | 195mm (L) |
| Pipe Fit | For 100mm Downpipe |
| Material | Cast Iron |
| Life Expected | 100 Years + |
| Pack Size | Single |
| Specification | BS460 |
| System Size | 150mm |
| Profile | Beaded Half Round |
Stopend Outlets form the connection between the cast iron guttering and the downpipe when the downpipe is positioned at the very end of the gutter run.
The pipe connection is to 100mm downpipe. We recommend that the joint should be sealed with silicon sealant, although this is not compulsory.
To prevent wind rattle in cast iron pipe connections, small timber or lead wedges should be used to centralise the joint.
Note that this fitting should only be used if the roof tiles or slates do not extend past the fascia board - if this is the case (such as at a gable end) you should use a running outlet with a small piece of gutter and an external stopend attached. This ensures that the rainwater from the end overhanging tiles is still channelled into the gutter.
