Aluminium Round Swaged Downpipe Bend - 92.5 Degree x 63mm PPC Finish Anthracite Grey (7016 Matt)
In stock
Code
2RB92-AG
Click or tap the image to open in fullscreen
| Code | 2RB92-AG |
|---|---|
| EAN Code | 0755907218347 |
| Angle | 92.5 Degree |
| Brand | ARP |
| Colour | Anthracite Grey |
| Material | Aluminium |
| Life Expected | 60 Years |
| Pack Size | Single |
| Specification | R10/311 Rainwater Drainage Systems |
| System Size | 63mm |
Aluminium 92.5 degree downpipe bends are used to create a bend in the run of an aluminium downpipe or more commonly, create a swan neck. A swan neck is created to take the downpipe from the running outlet, around the fascia and soffit and back against the wall. This section is made by getting two downpipe bends, cutting a small piece of downpipe and fitting the small piece of pipe in between the bends.
For more information about how to install our swaged downpipe system, please take a look at our downpipe installation guide.Please Note - Supplied in Matt RAL 7016 Anthracite Grey as standard - other finishes also available - please contact us if these are required.